Summerset Sizzler SIZ-26 Series, Инструкция по эксплуатации и установке

Страница: 8 / 28

SUMMER
SUMMER
SUMMER SUMMER SIZZLER
SIZZLER
SIZZLER SIZZLER by
by
by by SUMMERSET
SUMMERSET
SUMMERSET SUMMERSET Instructional
Instructional
Instructional Instructional Book
Book
Book Book
with the unit and set to 11" water column pressure.
The gas valves used in the grills are preset at the factory for Natural Gas or Liquid Propane
operation. Please contact your dealer and use a licensed contractor or installer to convert your
grill to a different gas type.
The self-contained LP system barbeque grill is design certified to be used with a standard 20 lb,
12 1/4" diameter, 18" high cylinder with right handed connection threads and this is the
maximum size LP tank to be used. The cylinder must be marked in accordance with the latest
U.S. Department of Transportation specifications for LP gas cylinders. (DOT. CFR49 or
National Standards Of Canada CAN/CSA-B359 Cylinders, Spheres and Tubes for the
Transportation of Dangerous Goods) a Propane Tank with an ODP ) Overfill Prevention Device)
must be used at all times.
Natural
Natural Natural
Natural Gas
Gas Gas
Gas Requirements
Requirements Requirements
Requirements
Always check the Rating Plate to make sure the gas supply you are hooking up to is the gas
type the grill is manufactured for.
IMPORTANT:
IMPORTANT: IMPORTANT:
IMPORTANT: Never
Never Never
Never connect
connect connect
connect the
the the
the grill
grill grill
grill to
to to
to an
an an
an unregulated
unregulated unregulated
unregulated gas
gas gas
gas supply.
supply. supply.
supply.
The installation of this appliance must conform with local codes or in the absence of local
codes, to the national fuel gas code, ANSI Z223.1a-1998. Installation in Canada must be in
accordance with the standard CAN/CGA-B149.2, Propane Installation Code.
A licensed contractor or local gas company representative must perform all natural gas
connections.
Ensure that the service supplying the grill is fitted with a shut off valve conveniently positioned
near the grill and giving ease of access.
The grill must be isolated from the gas supply piping system by closing its individual manual
shutoff valve during any pressure testing of the gas supply piping system at test pressures
equal to or less than 0.5 psi (3.5 kPa).
The grill and its individual shutoff valve must be disconnected from the gas supply piping
system during any pressure testing of that system at test pressure in excess of 0.5 psi (3.5
kPa).