Liner
Legs
Bath Tub with Liner
FEATURES AND COMPONENTS:
2
3
SETUP:
B
A
Step 1:
Unfold bath tub until locking snaps on underside of tub are fully
engaged (Figures A, B, and C).
Step 2:
Unfold legs by rotating out and pressing down until fully snapped in.
Repeat for each leg (Figures D, E and F).
D
E
F
H
I
J
Step 3:
To inflate liner, blow air with mouth into 2 locations noted (Figure G).
Note: You may need to squeeze the valve to inflate.
Step 4:
Make sure drain plug is engaged and fill tub with 1” of water (Figure H).
To use in reclined position:
Step 5:
Attach back strap to post on back of tub by reclining liner and securing
back strap over post of tub frame (Figures I and J).
Repeat on other side for newborns.
G
C
Locking Snap
