2
4
x 6
A
x 4
A
high chair assembly:
attach tray:
3
A
5
newborn insert:
Slide the snack tray tabs into position as shown.
Secure snack tray in place with 4 screws (2 screws on
each side.)
Position the seat assembly as shown. Line up the screw
holes on the wooden side rails with the holes on the
metal brackets and secure in place with 6 screw
(3 on each side). Double check that the seat is secure.
Tighten screws as needed.
Position the infant insert as shown. Thread webbing
in between the openings of padding between the
head and torso support sections.
Slide tray into position.
Snap the tray insert
into the tray.
reclining seat:
Your high chair has 3 recline angles. Lift the seat back up, rotate and release to adjust the angle.
NOTE:
Do not recline the seat back while the high chair is in use.
5
4
Push wood arm rest in to align with snack tray, then
rotate snack tray down into position as shown.
3
B
3
C
