5
Before using the handheld monitor, charge the battery for 4-5
hours. To set up the system, you will need two adults. One adult
should view the picture on the monitor while the other is in the
nursery to adjust the camera. Often the quality of the reception
can be improved by slightly repositioning the camera or the
monitor. It may help to place an object in the crib to simulate the
position and size of your baby.
Step 1:
Press and hold POWER/MENU button on handheld
monitor unit for 4-seconds until the Summer logo appears on
screen.
Video should immediately appear on screen.
If
video does not appear, go to “pair the monitor and camera”
section (page 7). If video appears, the initial set up is complete
and you can install camera.
in-home handheld setup:
plug into
AC adapter jack
turn on
camera setup (table top):
Determine a
location for the
camera that will
provide the best
view of your baby in
the crib. Place the
camera on a flat
surface, such as a
dresser, bureau or
shelf. NEVER place
camera or cords
within
3 feet
of the
crib.
IMPORTANT
at
least
3ft.
plug into
wall outlet
1
2
3
Be sure to test reception
and camera positioning
.
For camera wall-mount
option, refer to pg 7.