1. Floor Summer Garden Buildings – Octagonal Summerhouse 272
Prepare a level area of concrete or slabs for the Summerhouse. Position the base and ensure level
2.Wall panels
Position 2 plain panels on the floor as shown in the first diagram. Note how the panel frames sit on the floor with the panel cladding overhanging the floor edge. Ensure
square and secure using 4 x 63mm screws, screw through the frame of the first panel into the frame of the second panel.. Align the back panel next to the second panel and
secure in the same way using 4 x 63mm screws. Continue to add the rest of the panels in the same way.
Drill the holes in the panel
framing with a 4mm drill bit
Drill
before assembly.
63mm
Window panels
63mm
Panel cladding
Panel frames rest
Door panel
overhangs floor edge
on the floor
3. Door handle and towerbolts
Push the door lock into the rebate on the edge of the right-hand door as shown and secure using 2 x 25mm brass screws. Push the metal handle bar through the door latch
mechanism. Fit a door handle to the metal handle bar on each side of the door and secure them in place using 4 x 30mm black countersunk screws per handle. On the
other door fit the lock plate using 2 x 25mm brass screws. Attach the tower
Lock plate
attached with
2 x 25mm
brass screws
bolts to the inside of the left door as shown using 4 x 19mm round head screws per bolt.
Spindle may need to
be cut to 88mm
25mm
19mm
30mm
4.Walls to floor
With all the wall panels in position secure the walls to the floors using 2 x 65mm nails per panel, nail through the shiplap cladding of the panel into the sides of the floor.
65mm
65mm
For sales advice before you buy phone Summer Garden Buildings free 7 days a week on 0800 9777828
