Specifications
6-1
6
SPECIFICATIONS AND GENERAL INFORMATION
The S One range of cutters has been designed to produce computer-generated graphic designs
on cut sheet or roll vinyl media. Using the integrated optical positioning system (OPOS) allows
contour cutting of printed sheets of material. By replacing the knife with a pen, these cutters
can also be used to produce inexpensive previews of new graphic designs on paper.
The S One series are available in different sizes and different configurations. Depending on the
region, certain sizes and or configurations may not be available. Also, branding may be different.
In this section, we refer to the basic model names S1D60, S1D75, S1D120, S1D140 and SD160.
Where known, it is marked if a specification is configuration-depended.
•
Integrated roll feed system with media core holders
•
Fully adjustable media widths
•
Stand with basket (Optional on S1D60 and S1D75)
•
Back Media sensor for media detection
•
USB, Ethernet and Wi-Fi capabilities
o
Note: Wi-Fi only available in Europe, US and Canada
•
Integrated OPOS positioning and alignment system
o
With barcode recognition
o
OPOS X sensor automatically raised and lowered
•
Portrait Capacitive Touchscreen
–
320x240 pixels
•
English, Spanish, French, German, Italian, Dutch, Polish, Latvian, Čeština, Portuguese
•
Metric or English
6.1
General
6.1.1
Introduction
6.1.2
Feature list
6.1.2.1
Hardware
6.1.2.2
Interface
