Sumitomo CAK-0057-EX, Инструкция по эксплуатации

Страница: 11 / 27

10
補強材
最大 1mm
心線
Protective coating
Strength member
Collar
Max.1mm
撚り合わせる
Fold and strand the
strength member tightly
(Fig. 15)
(Fig. 13)
(Fig. 14)
(2) Fold back the strength member yarn
at about two strands and then insert
the optical fiber into the collar . (Fig.
13)
(3) Insert the collar into the cord jacket.
Note: Please make the collar projected from
the cord jacket by no more than 1mm.
(Fig.14)
(4) Keep the strength member folded and
strand it tightly. (Fig.15)
(5) Put the optical fiber in protective coating
remover through guide hole from front
face (label face). (Fig.16 ,17)
(Fig. 17)
Protective coating remover
(guide hole)
Note: Be careful not to nip the strength
member between the blade of the
remover, or the blades will be
damaged.
(Fig. 16)