Sumitomo CAI40C, Руководство по эксплуатации

Страница: 8 / 23

6
1. Standard specifications
Note 1: Models with a gear head cannot be used below 60Hz. Exercise
care.
Note 2: No resistor for brakes is built in.
Note 3: It is necessary to connect a reactor when grounding the inverter
later than January 1, 1997 in accordance with the “Guidelines on
high-frequency control for home electric appliances/general-pur-
pose products” issued by the Ministry of International Trade and
Industry in September 1994.
CAI40C CAI90C
3-phase induction motor
25/40 60/90
Conforming to CE mark UL
1.0~120Hz
106/152 212/303
0.28/0.4 0.56/0.8
Two times for 100 V class input
Proportional to input voltage for 200 V-class input
Single-phase 100~120 V 10% or single-phase 200~240 V 10%
50/60 5%
0.5~1.5 1.0~3.0
PWM control (Pattern: V/F)
Front panel volume or external volume
Low : 0 Hight : 8%
150% output for 1 min.
0.05 30.0sec
High/Low mode setting
Operation stop switch and forward-reverse switch
Operation stop command, forward-reverse command,
frequency command, free-run input, and alarm signal output
Self-diagnosis trip, protection form overvoltage, protection from
instantaneous overcurrent, protection from undervoltage, protection from
overload, protection of coolant from overheating, and electronic thermal
Front panel LED blinking
Open collector
National cooling
Below 1000 m without corrosive gas, liquid, or dust
2
10 to +40 without dew condensation or freezing
20 60
90%RH or less
Product name
Applicable type of motor
Applicable motor output (W)
Specification
Frequency (Hz)
Output capacitance (VA)
Output current (A)
Output voltage (V)
Voltage (V)
Frequency (Hz)
Input current (A)
Control system
Frequency setting
Toggle boost
Overtorque durability
Acceleration/decelera-
tion time
Torque setting
Front panel switch
Set signal external
terminal (8PIN)
Details of alarm
Alarm display
Alarm output
Cooling method
Location of installation
Degree of contamination
Ambient temperature
Storage temperature
Humidity
Output
rating
Ambient
condi-
tion
Control
charac-
teristics
Protec-
tion
function
Input
power
source