Sumig NANOCUT 40, Руководство по эксплуатации, Страница: 5 / 15

5
Electronic magnetic fields. MAGNETIC FIELDS can affect Implanted Medical Devices.
• Wearers of Pacemakers and other Implanted Medical Devices should keep away.
• Implanted Medical Device wearers should consult their doctor and the device manufacturer before going near any
electric welding, cutting or heating operation.
Noise can damage hearing. Noise from some processes or equipment can damage hearing. Wear approved
hearing protection if noise level is high.
Hot parts. Items being welded generate and hold high heat and can cause severe burns.
Do not touch hot parts with bare hands. Allow a cooling period before working on the welding gun. Use
insulated welding gloves and clothing to handle hot parts and prevent burns.
CAUTION
1.
Working Environment.
1.1 The environment in which this welding equipment is installed must be free of grinding dust, corrosive chemicals,
flammable gas or materials etc, and at no more than maximum of 80% humidity.
1.2 When using the machine outdoors protect the machine from direct sun light, rain water and snow etc; the temperature
of working environment should be maintained within -14°F to + 104°F.
1.3 Keep this equipment a distant of 1ft from the wall. 1.4 Ensure the working environment is well ventilated.
2. Safety Tips.
2.1 Ventilation
This equipment is small-sized, compact in structure, and of excellent performance in amperage output. The fan is
used to dissipate heat generated by this equipment during the welding operation. Important: Maintain good
ventilation of the louvers of this equipment. The minimum distance between this equipment and any other objects
in or near the working area should be 1.18 inches.
Good ventilation is of critical importance for the normal performance and service life of this equipment.
2.2
Thermal Overload protection.
Should the machine be used to an excessive level, or in high temperature environment, poorly ventilated area or if
the fan malfunctions the Thermal Overload Switch will be activated, and the machine will cease to operate. Under
this circumstance, leave the machine switched on to keep the built-in fan working to bring down the temperature
inside the equipment. The machine will be ready for use again when the internal temperature reaches safe level.
2.3
Over-Voltage Supply
Regarding the power supply voltage range of the machine, please refer to “Main parameter” table. This equipment
is of automatic voltage compensation, which enables the maintaining of the voltage range within the given range. In
case that the voltage of input power supply amperage exceeds the stipulated value, it is possible to cause damage to
the components of this equipment. Please ensure your primary power supply is correct.