Acknowledge
Alarm
The operator panel has 2 alarm diods, A - och B -alarm. When an alarm is not acknowledged they
will be flashing, to acknowledge an alarm do as follows
Press on , the marker will now flash at “
Status
”, Press .
Now the cursor is flashing on “
Not ackn.alarms
”
and confirm the choice with .
Browse with and to the
Alarm
that shall be acknowledged and press
.
To go back to the main menu or step back, press a couple if times.
If the alarm led is lit is the alarm acknowledged but is still active and when the alarm goes off it will
turn off automatically
9
9
<ENTER>
<ENTER>
CANCEL
PROG
Press on type the access
code
and press . The OPI now displays "
Choose function
"
Press on Move the cursor with or until the cursor is on "
Pump settings
"
Press on to confim the choice. Select "
Control
" and press to confirm.
The cursor is now flashing on the choice "
Normal control
", press to confirm.
Select the pump
1-16
C
onfirm with . Press
until the cursor is flashing on the selected
paramater to change.
Type
the new value with the keypad and confirm with .
In general, it is with the white keys (arrows and numbers) that are used for puting in and change
values and after that confirm with the ENTER key. This is also the way when manouver the menu tree
To go back to the main menu or cancel an input the PROG/CANCEL key is used.
CANCEL
PROG
8
<ENTER>
<ENTER>
<ENTER>
<ENTER>
<ENTER>
<ENTER>
<ENTER>
Program
Start/Stop
for pump
8
Press on Type the
CODE
for operator or system access.
Press to confirm. Now should it be displayed "
Choose function
" and the access level.
<ENTER>
Operator/system
access
CANCEL
PROG
CANCEL
PROG
81300052C
Information about the system
-Operator level:
-System level:
There are two access levels to the system
Access to change set-point values
Access to the whole system
The access codes default settings are:
Operator code: 1
System code: 2
With no access code can parameters only be viewed
Below it is shown how to put in an access code,
acknowledge an alarm and to set a start/stop level.
Quick guide for PCx/PCxop
Содержание PCx
Страница 2: ......
