Sulzer 2533, Инструкция по установке и эксплуатации

Страница: 7 / 16

7
ATTENTION The power cable should be connected to the chain or wire rope in such a manner that
it cannot become entangled in the propeller and that it is not subjected to any strain.
After lowering of the recirculation pump the chain or wire rope should have the tension released.
1028-00
Figure 8: Lowering into position
4.5 Laying of the power cables
NOTE The cable brackets here are not supplied as standard with the recirculation pump.
1
2 4
3
1
6
5
7
1029-00
Figure 9: Laying of power cable
Place cable holder (2) with rubber sleeve (3) a short distance above the recirculation pump on the connection
cable and tighten using hex bolt (1).
Connect the snap hook (4) to the cable holder (2) and chain or wire rope (5).