PREPARED SCOOTER
Color illustration
Thus, should a scooter after correct assembly.
Before using scooters, check the following:
1. Make sure that the handlebars are securely mounted.
2. Make sure that the tires are inflated to 35 psi.
3. Test the rear brake properly.
4. Check that both handlebar grips are firmly fixed.
5. Try foot stand.
6. Read the instructions for use on the next page.
So now you're ready to ride. But be sure to use a helmet and other
protective gear.
(23)
USE AND MAINTENANCE
USE SCOOTERS:
This non-motorized scooter with front and rear brake is designed for one driver. Not
suitable for persons weighing more than 100 kg. It is not designed for on-road, off road,
jumping, acrobatics, or for use with any motorized means of transport. Do not ride at
night, follow the traffic rules, pedestrians take precedence. Use caution when riding on
wet or slippery surfaces, especially when braking to avoid skids. Never leave your
scooter unlocked and unattended.
CORRECT RIDING AND BRAKING TECHNIQUE
Scooter should be used with caution, because the scooter riding requires certain skills.
Ability to drive and keep the body balance to avoid falls and accidents causing injury to
the user and others.
The user stands on the footboard while riding, bounce a foot from the ground and
controls the handlebars. When driving, keep both hands on the handlebars. Slow down
when turning or when you don´t go straight ahead and in danger of losing balance. Slow
down when you want to get down from the scooter. After a complete stop remove the first
one leg and then the other from the footboard. Slow down by pressing and holding the
brake lever on the handlebars.
Before start using the scooter, try all scooter controls to avoid falls and accidents.
MAINTENANCE SCOOTERS:
This scooter is well made and regular maintenance and judicious use will keep your
scooter in good condition for many years and the ride will be more safety.
Make a habit of regularly checking that everything is sufficiently tightened. Check that the
handlebars are secure, the axles of both wheels secured and brake is not loosened.
Check brakes before each ride. Check the brakes levers. Make sure that the brake pads
are not worn and cables are not frayed.
Note: Check tire pressure every week, the correct value is indicated on the tire sidewall.
Note: Riding on underinflated tires risks damaging the wheel or tire. The scooter may
become harder to handle.
Bearings and spokes are difficult to repair and replace. Therefore, their lubrication,
cleaning or replacement should be by a qualified service centre.
Self-locking nuts or other self-locking accessories, after frequent loosening and tightening
lose their effectiveness. In this case it is necessary to replace the self-locking part.
TOOLS REQUIRED FOR COMPILATION
Allen key
Multi wrench
Note: Tools not included. Picture of unassembled scooter in the manual is for
illustrative purposes only. Picture of scooters assembled in the instruction may differ
in cosmetics detail.
(24)
