Sullivans 39282, Инструкции

Страница: 3 / 5

Ironing Center Instructions
Page. 2
1. Place Boards A, B and C face down as shown below and screw hinges (9) using screws (1); attach plastic clamp (12)
into boards B and C as shown using screws (11). Using screws (1) attach hinges (6) to left and right door panels I and J
and to boards D and F. Insert Cams (4) and Cam Bolts (3) into Boards A, D, E, F and G as shown. Finally use spear strike
(5) and screws (1) to connect Iron Caddy L to board C .
Align the gap of the cam to the
hole at the edge of board, then
lightly turn left and right using
screwdriver to fit cams inside.
2.
Insert
Cam bolt (3)
on board
D
into the
Cams (4)
on board
E and G
as shown above, turn the cams clockwise.
Insert
Cam bolt (3)
on board
F
into the
Cams (4)
on board
E and G
, turn the cams clockwise.
Use
screw (1)
to connect
Caster (7)
and
Locking Caster (8)
onto board
H
.
Use
screw (2)
to connect boards
H
with board
F and D
, make sure to align the back of board
H
with boards
F and D
.
Use
screw (1)
and spear
strike (5)
to connect the
support bracket K
onto
board F
, then flip the cabinet to stand it up.