CIF A28763647
+34 916774540
ATC:
916749481 - [email protected] /
SAT :
916749483 - [email protected]
www.sulion.es
Calle Verano, 51 - 28850 Torrejón de Ardoz - Madrid (España)
Warranty
The Manufacturer guarantees the correct functioning of the product and
free possible repairs or to supply free parts of the model due to manu-
facturing faults for 3 years from the date of delivery or 5 years for LED
components. The Manufacturer cannot be held liable for damages and/
or losses caused by improper use of the equipment.
To make a claim, you must attach the receipt to this warranty.
If the Manufacturer opts to repair the product and the repair is not satis-
factory or opts to replace a defective product or send a spare part but is
not able to because it has been discontinued, the Manufacturer can re-
turn the amount to the buyer or replace the product with a similar product
(the design or specifications of which may vary slightly).
On the other hand, if the Manufacturer, within the 10-year maintenan-
ce period for repair parts, does not have them or they are discontinued,
the Manufacture undertakes to repair the product or give the customer a
discount on a new or reconditioned product with the same or equivalent
characteristics.
Warranty terms and conditions available at https://sulion.es/es/conten-
t/12-terminos-y-garantia
EC Declaration
SULION declares that the radio equipment type BECOOL / BELOW
(Ref.:102011 / 102025 / 102026 /102027 / 102041) complies with the
Directive 2014/53/EU and Directive 2011/65/EU on the restriction of
hazardous substances (RoHS).
The full EU declaration of conformity text is available on the following
website: www.sulion.es/en
EN
Caution
Follow these instructions carefully,especially when fixing to the cei
-
ling (if not assembled properly it can be dangerous)*, to enjoy maxi-
mum safety in the installation and performance of this equipment.
Do not throw away electrical products together along with house-
hold waste. Please recycle the packaging at the collection points
provided for this purpose. Contact local authorities or your provider
for recycling advice. Thank you for recycling them at the collection
points provided for this purpose.
The installation must be carried out by qualified personnel to per
-
form electrical installations in accordance with the regulations in
force in the country of installation.
A breaker system must be added to the permanent wiring. Do
not connect any regulation element or potentiometer, as it could
lead to malfunctions and/or damage.
Only suitable for indoor.
LED no substituível
Driver Substituível
Note:
Important warnings and instructions in this manual do not guarantee
covering all possible conditions and situations that may occur. It should be
understood that common sense, caution and care are factors that cannot be
included in all products. These factors can only and should be provided by
the user who takes care of and enjoys this product.
Installing the product
See installation steps at the end of this manual
Network conection
1.- Screw type terminal
2.- Class II: 2 Poles (L + N) / Class I: 3 Poles (L + N + TT)
3.- Assigned Voltage 250V and Current 10A.
4.- The terminals must have a minimum capacity of 1.5mm ² for indoor lighting and 2.5mm ² for outdoor lighting.
5.- Verify that the connection block is suitable for the output cable, either a unipolar cable or a bipolar / tripolar
cable.
6.- Check if the connection block to be included must be fixed on the luminaire. It must always be kept away from
heat sources.
7.- IP grade. It must be according to the IP grade marked on the luminaire
8.- In accordance with the EN 60998-2-1 or EN 909998-2-2 standards.
* Respect the color code according to the terminal (L = Brown, black or gray. N = Blue, Ground = Green and yellow)
* Minimum values. In cases of powers higher than 2500W, check the current to know the characteristics of the
connection lock.
* Check if the connection block requires ferrules or special preparation for a correct connection.
- The data shown in this table are merely informative and do not constitute, in any case, unique conditions of
connection to ref by the user or installer. In case of opting for another connection block, the conditions of use that
the EN 60598-1 standard establishes must be respected, highlighting the requirements of creepage distances and
distances in the air for grid connection blocks.
Type A: For making connections inside Class I luminaires. The class II version is similar, but with two poles.
Type B: To make connections to the exterior of Class I luminaires. The Class II version is similar, but with two poles.
Type C: To make connections outside luminaires with class I disconnection. The class II version is similar, but with
two poles. Check that the cable diameter is suitable for the type of connection block.
Type D: To make connections outside luminaires with Grade> IP20. Check that the cable diameter is suitable for the
type of connection block.
