Sukkah Center EZ PANEL, Руководство по сборке

Страница: 9 / 9

• 8 •
SUKKAH WOOD SIZE CHART
In order to strengthen the walls of the Sukkah, place wood inside the
panel connectors around the top perimeter of the Sukkah, see size
chart below.
If you are able to cut the wood, it is best to place the wood from corner
to corner.
Please note on a standard size wood beam, it should be cut 6” shorter
then the size of the sukkah wall.
TOP OF SUKKAH WOOD BEAM PLACEMENT
Place 1 beam holder over the top over of the panel, then clip into place.
Place 1 holder for each side of the 2” x 3” wood beams (2 per beam) on
the top of the Sukkah, beams should be placed approximately every 4’.
Wood beams should hang over the sukkah 1’ on each side.
6’ 5.5’ 2 X 3
8’ 7.5’ 2 X 3
10’ 9.5’ 2 X 3
12’ 11.5’ 2 X 3
14’ 13.5’ 2 X 3