Suhr A.C.E, Руководство пользователя

Страница: 6 / 16

6
Controls
INPUT:
This control functions only when using the From Amp input. It is
used to set the volume of your amp signal before it goes through the filter.
*This control can be set as desired as long as the Clip light does not turn
on. If it does, turn the Input knob counter clockwise to prevent the filter from
clipping.
SUB:
This control reduces or increases the amount of low frequency bass
of the output
HIGHS:
This control reduces or increases the amount of middle and high
frequencies of the output
PRESENCE:
This control reduces or increases the amount of presence fre-
quencies of the output
LIFT GROUND (XLR):
This switch lifts the ground on the XLR output when
flipped to the up position.
BYPASS/ACTIVE:
When set to Bypass, the filter is bypassed and the out -
put is an unfiltered line level signal. When set to Active, the filter is engaged
as in normal operation.
PHASE (XLR):
This switch flips the phase of the Balanced output (XLR)
when flipped to the up position.