SUHNER LWE 10-TOP, Техническая документация

Страница: 20 / 60

1.1 g
enerAl notes on sAfety
This operation manual is applicable for the machine LWE
10-TOP.
The machine may only be handled by personnel
who are qualified.
1.2 u
se of the mAchine for PurPoses for
which it is intended
The machines are intended for the purpose of cutting,
roughing and brushing of metal and stone materials.
1.3 i
ncorrect use
All uses other than those described under section
1.2 are regarded as incorrect use and are there-
fore not admissible.
1.4 ec
declArAtion of conformity
Translations of the «EG-Koformitätserklärung (Original)».
Otto Suhner GmbH of Trottäcker 50, D-79713 Bad Säck-
ingen, hereby declares under sole responsibility that the
product with the serial or batch no. (see reverse side)
complies with the requirements under the Directive
2006/42/EG. Applied standards: EN ISO 12100, EN ISO
11148. Document Agent: M. Voyame. D-Bad Säckingen,
07/2019. M. Voyame/Managing Division manager
2. c
ommIssIonIng
2.1 P
rior to tAKing the mAchine into serVice
Si raccomanda aria compressa oleosa(see
also air quality under section 2.3). Ob-
serve national regulations.
2.1.1 f
itting of hose couPling
Fitting of hose coupling inside diameter min. 7mm (avail-
able as optional accessory, item no. 90805700).
1. n
otes on
s
aFety
2.2 t
AKing the mAchine into serVice
2.2.1 t
urn on
/t
urn off
Tilt lock forward and press lever on plastic sleeve. Releas-
ing the lever will shut the machine down.
2.3 r
Ating dAtA
Pressure max. 6.3bar
Power output 600W
Air consumption full load EN ISO 15744 1.05m
3
/min
Air consumption at idling EN ISO 15744 1.3m
3
/min
Setting oiler idle about 5-6 drops/min
No-load speed 10000min
-1
Max. wheel diameter 115mm
Grinding spindle thread M14 / 5/8“
Sound pressure level EN ISO 15744 79dB(A), K=3dB(A)
Vibration EN ISO 28927-12
4.9m/s
2
, K=1.6m/s
2
Air quality DIN ISO 8573-1 3/4/4
Weight 1.600kg
2.4 o
PerAting conditions
Temperature range during operation: 0 to +40°C
Relative air humidity: 95% at +10°C not condensed
3.
handlIng
/ o
PeratIon
3.1 P
rotectiVe deVices
The machine may only be operated with
the safety guards and the additional han-
dle fitted!
CN
PL
CZ
FI
SE
NL
PT
ES
IT
EN
FR
DE
EN
20