SUHNER ABRASIVE SP 1330 Flat, Техническая документация, Страница: 23 / 64

3.1
hAnd Piece
Only SUHNER hand piec-
es must be used. The in-
structions issued by the
manufacturer must be observed! Use only hand pieces in
perfect condition. Examine hand piece before use. The
hand piece must be centred and secured with the lock-
nut.
V
ery shArP BlAde
!
3.1.1 c
hAnging
/c
onnecting the hAnd Piece
Screw the hand piece to pneumatic drive, align it, and se-
cure with locknut. After connecting, press the grease can
button two to three times. If you cannot completely screw
in the hand piece, turn the blade slightly.
V
ery shArP BlAde
!
3.2 t
ools
Use only clean tools!
3.2.1 c
onnecting
/
detAching
/
the BlAde
Use an allen key to loosen the setscrews.
3.
handlIng
/ o
PeratIon
Remove the blade housing by drawing it towards you.
Detach the blade from the blade housing. To connect
the blade, follow the above instructions in reverse order.
Tighten the screws with max. 1.5 Nm. After connecting,
press the grease cup button two to three times.
V
ery shArP BlAde
!
3.2.2 c
onnecting
/
detAching the dePth gAuge
Position the depth gauge in the blade housing. Secure/
release the depth gauge at the two allen screws.
PT
ES
IT
EN
FR
DE
NL
PL
CZ
FI
SE
CN
EN
23