Rev.00
– 29/12/2020
Pag. 6/16
Code: 71082
Do not use the charge indicator as a tool to program the dive or the duration of the dive during its course, but program
the dive with the usual safety parameters.
NOTE: SUEX s.r.l. declines any responsibility for the failure or incorrect evaluation of the residual battery
charge that has led to incorrect assessments regarding the autonomy of the Scooter.
8.2. BLUETOOTH CHANNEL
On board the Scooter there are Bluetooth devices through which information about the engine can be obtained.
These features are active only out of the water and require the use of the Calypso application available on Google
Play and the App Store.
To activate the Bluetooth make sure that the battery is connected to the engine and turn on the scooter.
Once the BT devices are active, the application is ready to read the data.
At the first connection, the application will request the pairing of the devices to the smartphone.
The engine will have an identifier of this type: AAxxxxxxxxxx.
For the next steps, follow the application instructions.
The acceleration ramp of the Scooter is also adjustable through the same application.
9.
BATTERY CHARGE
9.1. HOW TO CHARGE THE BATTERY
To charge, place the BATTERY in a safe place away from people and flammable objects and proceed as described
below.
USE ONLY THE APPROPRIATE BATTERY CHARGER
The battery should ONLY be recharged using the specific battery charger supplied (code 71083).
When the charger is not in use, disconnect it from the wall outlet and put it in its case.
CHARGE PROCEDURE
Carefully read the battery charger instructions manual.
Charge the battery before each use, allowing it to cool before inserting it into the Scooter; during this phase the
battery could release hydrogen which would inevitably accumulate inside the airtight scooter.
The accumulation of hydrogen (in special conditions) could cause accidents, with injuries to people and things.
Extreme temperatures can affect the battery's charging capacity.
