CONTROLS & FUNCTIONS
1. CHANNEL INPUT
Connect the Mix Out output from a mixing desk
or PA speaker to this input via either 6.3mm
(1/4”) TS Jack or XLR cable.
2. MIX OUT
Balanced, mono summed, full range output.
Connect the subwoofer to a PA speaker, or
further subwoofers, using this output.
3. LED INDICATORS
•
POWER:
When lit, the power is on.
•
SIG:
When lit, the speaker is receiving an input
signal.
•
CLIP:
When lit, the input signal level is excessive
and should be reduced.
4. MASTER VOLUME
Increase or decrease the volume of the
subwoofer.
5. PHASE REVERSE SWITCH
Reverses the phase of the subwoofers output
by 180º. If you find you are having problems
with the bass frequencies when the subwoofer
is connected to a PA speaker (such as a lack of
volume, or lack of a certain low-end frequency),
try using this function.
6. BASS BOOST
Boosts the output by 10dB.
7. VOLTAGE SWITCH
Changes the input voltage. Ensure this is correct
for your region.
8. POWER SWITCH
Turns the Unit On or Off.
9. POWER CONNECTION
Connect the supplied power cable here.
5
-∞dB
PHASE
LINK
INPUT
OUTPUT
ON
OFF
POWER
AC INPUT
BOOST
0dB
CLIP
SIG
0°
180°
1
2
7
8
3
4
5
6
9
