Subtronic Nova, Руководство пользователя

Страница: 10 / 20

.
SLAVE FLASH CONTROL depends on the Model
The optical slave triggering works only correct with analogical cameras or with digital
cameras in manual-mode.
the short Version of Nova has no slave-function included, because modern digital cameras
do not support this function. This depends on the pre-flash.to use the slave-Mode via
sensor you need a slave-flash-trigger-module to control theslave flash. In this case switch
off the TTL on the Master.
Nova in Slave Mode digital cameras
Use both flashes in manual mode only. In all other cases you get a wrong exposure.
example for Master-Slave on digitalcameras
Turn the main-function-switch on elder models in “ SLAVE ”-Position.
Select the output level 1/2, 1/4, 1/8, 1/16, 1/32 on the powerstep-selection-switch.
The flash gun then restricts the output performance to this value.
The flash gun is triggered when the light from another flash gun hits the meter cell in the
reflector.
In order to check that flash ignited correctly, the ERROR indicator start to blink fast.
•
The flash may not be triggered in shallow water with strong direct sunlight.
•
A slave flash requires light to be received from his meter cell to be triggered.
The flash will probably not be triggered if the flash gun is flashed from behind and
there is only blue water in front of it.
•
The range will vary according to the water conditions, the flash output and the angle
at which the flash hits the meter cell. A range of up to 15 m is possible in clear
water.
Page 10 of 20