Subtech DrainCam Mini ST 5500, Руководство пользователя

Страница: 17 / 21

Be sure the LCD frequency is set to 512 and position the locator within the pipe access
chamber
Hold the locator above the Camera head at ground
level. Adjust the sensitivity of the locator by pressing the
“+” or “-” pushbuttons to keep the signal on scale.
Rotate the receiver until the maximum signal is
detected.
NOTE
Moving the locator further left and right will result in detecting smaller “ghost” signals
either side of the main one. This is normal. Always be sure to locate all three peaks when
locating the position of the camera as the ghost signals are not directly over the camera. The
largest one is the true position.
Moving forward and back across the camera will not detect ghost signals.
leaving it still
visible.