SubSurface Instruments LD-18, Руководство по эксплуатации

Страница: 37 / 60

1. Introduction
32
1-1 What is “WLDwin software”?
This software loads measured data saved in a water leak detector (
LD-18
) to a PC and executes data edit,
graph display and data save.
1-2 Operating environment (recommended)
Software (OS) : Windows Vista, XP, 2000
Hardware : Hard disk having a free space of 100MB minimum
CD-ROM drive
USB port (1.1 or later)
Others : USB connecting cable
1-3 Before use
●
A dedicated driver is required in the PC where this software was installed, for implementation of data
communication with this detector connected to a PC. Install the driver after installation of this software.
●
Use the provided USB connecting cable for communication with this detector.
●
Turn ON the power for the detector and check the battery capacity before connecting this detector to the PC.
Data communication is not permitted if the battery mark on the detector is flickering.
[Software]