Step 2:
With the motor section sitting propellers down and flat on the ground, carefully install the
battery pack onto the motor, through the 4 available holes.
Follow the alignment directions
marked on the battery pack. The battery pack has a preferred orientation which will
provide optimal trim.
The mounting threaded rods may be pre-set, but it is MOST IMPORTANT that the battery
pack is not installed too far towards the nose of the scooter. The maximum distance is
450mm as measured from the point indicated by this picture below and the top of the battery
pack:
CAUTION: Measure at 4 positions around the battery pack to ensure the pack is
installed perfectly in line with the motor. Failure may result in a flooded scooter.
