28
29
If the device will be idle for a long time, please note that the MixPro and the battery
should be stored separately in the package; and please observe the following
directions.
1. Ensure that the device is stored in a cool and ventilated place, above 0°C and below
45°C where the humidity is 65±20
%
RH.
2. Avoid direct sunlight.
3. Keep it away from heat, fire, and children's reach.
4. Keep it away from devices that may generate strong magnetic fields.
5. Take out the device at least once a month and run it for about 10 seconds to
prevent corrosion caused by changes in the storage environment.
Storage
2
Fault
Propeller stuck or
abnormally running
Damaged or
swollen battery
1. Turn off the device
2. Check if the propeller is entangled in foreign matter
3. Follow the instructions in the “Maintenance” chapter to
clean the underwater scooter
4. Contact Sublue or an authorized service organization
1. Check for damage around the battery contacts
2. Check the device’s sealing gasket for damage or
protrusions
3. Check the battery sealing surface corresponding to
the sealing gasket for scratches or protrusions
4. If the corrosion is slight, clean it with a dry cloth
5. Contact Sublue or an authorized service organization
Battery contact is
corroded
Solution
Contact Sublue or an authorized service organization
General Troubleshooting
Failure to power on
1. Check if it is in one-hand operation mode or
speed-change operation mode
2. Try to reboot the device
3. Contact Sublue or an authorized service organization
Abnormal operation
1. Please fully charge the battery and install it before restart
2. Contact Sublue or an authorized service organization
Failure Code: ER00
1. Please power off the device and take out battery
2. Contact Sublue or an authorized service organization