SubDude Audio PINWOOFER, Инструкция по эксплуатации, Страница: 8 / 15

KO BBU Connections
1. Disconnect the Harness Power Cable from
the PinWoofer Amplifier and plug it into the
5.5mm BBU Power Jack.
2. Connect the New Power Cable Stub to the
2-pin header on the BBU observing the
polarity shown.
3. Plug the other end of the New Power Cable
Stub into the 5.5mm amplifier power jack.
4. Disconnect the Harness Audio Cable
(3.5mm Male Mini-Plug) from the
PinWoofer Amplifier Input and plug it into
the LINE_IN jack on the BBU.
5. Connect the 3ft 3.5mm Male to 3.5mm TRS
Male Cable from the BBU LINE_OUT to the
PinWoofer Amplifier Input Jack. (The image
shows a 6in cable to minimize clutter.)
6. Plug the 12ft Subwoofer Cable into the
SUB_OUT jack on the BBU.
7. CAUTION: Please examine the red and black
wire orientation at the header labeled “2” –
DO NOT reverse the wire orientation – use
care to ensure that the red and black wires
are as shown.