1.
Place this product in a cool area of the room and far away from any heat source for a maximum function.
2.
Do not store hot food in the refrigerator, wait for it to cool before storage. This will prevent the compressor
from breaking down
3.
Ensure foods and other items placed in the refrigerator is wrapped properly or with a dry container to
prevent frost build-up inside the unit
4.
Do not line the storage bin with an aluminum foil, wax paper or to improve the efficiency of the refrigerator
5.
Well organization and proper food labelling should be taken into consideration to reduce frequent door
openings to improve the efficiency of the appliance.
7
Heavy frost will influence the refrigeration of the appliance and increase the energy consumption. Thus,
defrosting is needed when the frost is as thick as 5 mm. The process for manual defrost are listed as follows:
•
Take all the food out of the compartment;
•
Remove the shelf;
•
Unplug the power cord;
•
Open the doors and wait for thawing;
•
Wipe the defrost water with a dry cloth.
In case of a power failure, the refrigerator can store food normally for several hours.
❑
During power failure
After power failure, do not put additional food in the appliance and reduce the frequency of door opening. Make
several ices in a container if know the power failure beforehand, and put it in the top of the fridge.
❑
During vacation
Please fetch out the easy-rot food and the food in fridge before shot vacation. After confirmation, close the door
firmly. If have a long vacation, please fetch out all the food and cut off the power. After defrosting, clean up the
liner of the appliance and wipe it dry, and leave the door open.
❑
Not in use
If the refrigerator will not be in use for a long period of time, please unplug the outlet and clean up the appliance.
The door should be kept open in order to prevent unpleasant smell caused by food leavings.
Warning:
Do not use any other equipment or method to assist the defrost process. It may cause
damage to the cooling system.
Attention:
In a general working conditions, do not restart the power immediately, please leave at at least 5
minutes before powering back on.
