Black plate (499,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
Aluminum wheels
Aluminum wheels can be scratched and
damaged easily. Handle them carefully to
maintain their appearance, performance,
and safety.
.
When any of the wheels are removed
and replaced for tire rotation or to change
a flat, always check the tightness of the
wheel nuts after driving approximately
1,000 km (600 miles). If any nut is loose,
tighten it to the specified torque.
.
Never apply oil to the threaded parts,
wheel nuts, or tapered surface of the
wheel.
.
Never let the wheel rub against sharp
protrusions or curbs.
.
Be sure to fit tire chains uniformly and
completely around the tire, otherwise the
chains may scratch the wheel.
.
When wheel nuts, balance weights, or
the center cap is replaced, we recommend
that you replace them with genuine
SUBARU parts designed for aluminum
wheels.
Windshield washer fluid
&
Adding the windshield
washer fluid
CAUTION
Never use engine coolant as washer
fluid because it could cause paint
damage.
When there is only a small amount of
washer fluid remaining, the windshield
washer fluid warning indicator will appear.
When this occurs, refill the washer fluid as
follows.
Remove the washer tank filler cap, then
add windshield washer fluid until it
reaches the
“
FULL
”
mark on the tank.
&
Windshield washer fluid
Use windshield washer fluid. If windshield
washer fluid is unavailable, use clean
water.
In areas where water freezes in winter,
use an anti-freeze type windshield washer
fluid. SUBARU Windshield Washer Fluid
contains 58.5% methyl alcohol and 41.5%
surfactant, by volume. Its freezing tem-
perature varies according to how much it
is diluted, as indicated in the following
table.
Maintenance and service/Aluminum wheels
11-41
–
CONTINUED
–
11
