20
Auto Vehicle Hold Function
(if equipped)
The Auto Vehicle Hold function will
automatically keep the vehicle stopped
even after releasing the brake pedal
when the vehicle is stopped, such as at
traffic signals. To activate, press the Auto
Vehicle Hold switch. The Auto Vehicle
Hold ON indicator light on the instrument
panel will illuminate. To deactivate, press
the switch again. While the Auto Vehicle
Hold function is operating, the Auto
Vehicle Hold operation indicator light
on the instrument panel will illuminate.
Electronic Parking Brake
(if equipped)
To apply, depress the brake pedal and
pull up the parking brake switch. The
brake system warning light on the
instrument panel and the indicator light on
the parking brake switch will illuminate.
To release, make sure all doors are closed
and your seatbelt is fastened, then gently
push the accelerator pedal. Or, while
the ignition switch is in the ON position
and the brake pedal is depressed,
push down the parking brake switch.
While Operating
3572136_19b_WRX_WRX_STI_QG_061118.indd 20
6/11/18 5:07 PM
