Subaru Tribeca 2014, Краткое руководство пользователя

Страница: 3 / 16

3
TRIBECA
E
Headlights / turn signal
1
Headlights
To turn on, rotate knob to the following positions:
:
Parking lights, instrument panel illumination
tail lights and licence plate lights are on.
: Headlights are on.
2
High/low beam change
To change to high beams, push lever forward.
To return, pull back to original position.
To flash high beams, pull lever back and release.
3
Turn signal
Move lever up or down.
1
2
3
3
F
Fog lights
To turn on, rotate dial to .
Fog lights operate only when headlight switch is .
However, the fog lights turn off when the headlights are switched
to high beams.
G
Illumination brightness control
To adjust brightness of the audio, air conditioner, multi-function display
(if equipped) and instrument panel illumination, turn dial.
If the displays are too dim for legibility, turn dial fully upward to position.
The illumination brightness becomes the maximum and the automatic
dimming function will be cancelled.
H
Headlight beam leveler (if equipped)
To adjust headlight
beam level, turn dial.
I
Parking light switch
To turn on, press switch.
This switch operates
regardless of ignition
switch position.
OFF
ON
To prevent the battery from discharging, make sure that the light control switch is turned to OFF before
leaving the vehicle.