Subaru ROBIN RGD3300H Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 43

Subaru ROBIN RGD3300H Скачать руководство пользователя страница 15

ENGLISH

FRANÇAISE

ESPAÑOL

OWNER´S WARRANTY RESPONSIBILITIES.

●

As the off-road compression-ignition engine owner, you are responsible for the performance of the required
maintenance listed in your owner's manual.
Motorenfabrik Hatz GmbH & Co. KG recommends that you retain all receipts covering maintenance on your off-
road compression-ignition engine, but Motorenfabrik Hatz GmbH & Co. KG cannot deny warranty solely for the
lack of receipts or for your failure to ensure the performance of all scheduled maintenance.

●

As the off-road compression-ignition engine owner, you should however be aware,
that Motorenfabrik Hatz GmbH & Co. KG may deny you warranty coverage if your off-road compression-ignition
engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

●

Your engine is designed to operate on diesel fuel only. Use of any other fuel may result in your engine no longer
operating in compliance with California´s emission requirements.

●

You are responsible for initiating the warranty process. The ARB suggests that you present your off-road
compression-ignition engine to a Motorenfabrik Hatz authorised dealer as soon as a problem exists. The warranty
repairs should be completed by the dealer as expeditiously as possible.

If you have any questions regarding your warranty rights and responsibilities, you should contact HATZ DIESEL OF
AMERICA, Inc. at (262)-544-0254.

HATZ DIESEL SUPPLEMENTAL WARRANTY FOR 2005 AND LATER
CALIFORNIA CERTIFIED OFF-ROAD COMPRESSION-IGNITION ENGINES.

PARTS WITH SUPPLEMENTAL LIMITED WARRANTY

.

The following limited warranty is supplemental to the standard HATZ DIESEL LIMITED ENGINE WARRANTY
and covers 2005 and later California certified off-road compression-ignition engines and applies to the following
exhaust emission-related components:

●

Fuel injector

●

Fuel injection pump

●

Bimetallic Strip

●

Intake manifold

●

Exhaust manifold

●

Crankcase breather valve

●

Oil filler Cap

●

Intake and exhaust gaskets at head interfaces

RGD5000H us̲GU2359 07.4.16 0:00 PM ページ014

«
...
13
14
15
16
17
...
»

Содержание ROBIN RGD3300H












































Отзывы:

Нет отзывов