Black plate (165,1)
一
般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
&
Vehicle Dynamics
Control warning light (if
equipped)/Vehicle Dy-
namics Control OFF in-
dicator light
(if equipped)
This warning light has the function of
indicating faults in the Vehicle Dynamics
Control system and the function of indicat-
ing that the Vehicle Dynamics Control
system has been deactivated.
It comes on in the event of a fault in the
system and is on when the system is not
operating.
This warning light comes on when the
ignition switch is turned to the
“
ON
”
position and goes out after the engine
has started. It indicates that the Vehicle
Dynamics Control system is in normal
operation.
!
Vehicle Dynamics Control warning
light
The Vehicle Dynamics Control system is
probably inoperative under any of the
following conditions. We recommend that
you have your vehicle checked at a
SUBARU dealer immediately.
.
The warning light does not come on
when the ignition switch is turned to the
“
ON
”
position.
.
The warning light comes on while the
vehicle is running.
.
If the electrical circuit of the Vehicle
Dynamics Control system itself becomes
faulty, the warning light only comes on. At
this time, the ABS (Anti-lock Brake Sys-
tem) remains fully operational.
.
The warning light comes on when the
electronic control system of the ABS/
Vehicle Dynamics Control system be-
comes faulty.
The Vehicle Dynamics Control system
provides its ABS control through the
electrical circuit of the ABS system.
Accordingly, if the ABS is inoperative, the
Vehicle Dynamics Control system be-
comes unable to provide ABS control. As
a result, the Vehicle Dynamics Control
system also becomes inoperative, caus-
ing the warning light to come on. Though
both the Vehicle Dynamics Control and
ABS systems are inoperative in this case,
the ordinary functions of the brake system
are still available. You will be safe while
driving with this condition, but we recom-
mend that you have your vehicle checked
at a SUBARU dealer as soon as possible.
NOTE
If the warning light behavior is as
shown in the following, the Vehicle
Dynamics Control system may be con-
sidered normal.
.
The warning light comes on right
after the engine is started but goes out
immediately, remaining off.
.
The warning light comes on after
engine startup and goes off while the
vehicle is subsequently being driven.
.
The warning light comes on during
driving, but it goes out immediately and
remains off.
!
Vehicle Dynamics Control OFF in-
dicator light
.
It comes on when the Vehicle Dy-
namics Control OFF switch is pressed.
.
It also comes on when the Vehicle
Dynamics Control system is deactivated.
NOTE
.
The light may stay on for a while
after the engine has been started,
especially in cold weather. This does
not indicate the existence of a problem.
The light should go out as soon as the
engine has warmed up.
.
The indicator light comes on when
the engine has developed a problem
and the Malfunction indicator light is
on.
The Vehicle Dynamics Control system is
probably faulty under the following condi-
tion. We recommend that you have your
Instruments and controls
3-35
–
CONTINUED
–
3
Содержание Legacy Outback 2008
