Subaru Legacy Outback 2008, Руководство пользователя

Страница: 135 / 471

Black plate (138,1)
一 般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
3-8
Instruments and controls
circuit malfunctions.
.
Do not wash the access key in
an ultrasonic washer.
.
Do not leave the access key in
humid or dusty locations.
Doing so may cause malfunc-
tions.
.
Do not leave the access key
near personal computers or
home electric appliances.
Doing so may cause the ac-
cess key to malfunction, re-
sulting in battery discharge.
.
The access key is always com-
municating with the vehicle;
thus, it is continuously using
the battery. Although the life of
the battery varies depending on
the operating conditions, it is
approximately 1 to 2 years. If
the battery becomes fully dis-
charged, replace it with a new
one.
.
If the access key is dropped, the
integrated mechanical key inside
may become loose. Be careful
not to lose the mechanical key.
NOTE
.
If an access key is lost, it is
recommended that the access key be
reregistered. For reregistration of an
access key, we recommend that you
contact a SUBARU dealer.
.
For a spare access key, we recom-
mend that you contact a SUBARU
dealer.
.
Up to 7 access keys can be regis-
tered for one vehicle.
.
Carefully store the key number plate
and security ID plate supplied with the
access key. They are necessary for
vehicle repair and additional registra-
tion of access keys.
.
Do not leave the access key in the
storage spaces inside the vehicle such
as the door pocket and the dashboard.
Vibrations may damage the key or turn
on the switch, possibly resulting in a
lockout.
Hazard warning flasher
The hazard warning flasher is used to
warn other drivers when you have to park
your vehicle under emergency conditions.
The hazard warning flasher works with the
ignition switch in any position.
To turn on the hazard warning flasher,
push the hazard warning button on the
instrument panel. To turn off the flasher,
push the button again.
NOTE
When the hazard warning flasher is on,
the turn signals do not work.