Conventional Cruise Control
97
(2) Switch to Conventional Cruise Control.
Press and hold the
/
(Following distance setting) switch for approximately 2
seconds or longer to switch from Adaptive Cruise Control to Conventional Cruise Con-
trol. A notification sounds 1 short beep.
At this time, the following distance setting indicator on the EyeSight display area of the
combination meter display turns off and
(Conventional Cruise Control indicator)
(white) is displayed.
To set the ready status:
Conventional Cruise Control can be acti-
vated when all of the following conditions
are met and
(READY indicator) is
displayed on the EyeSight display area.
- All doors (except the rear gate) are
closed.
- The driver’s seatbelt is fastened.
- The electronic parking brake is not
engaged. The electronic parking brake
indicator light is turned off.
- The select lever is in the
position.
- The brake pedal is not depressed.
- The road is not on a steep slope.
- The steering wheel has not been turned significantly in either direction.
- The X-MODE is not turned on (the X-MODE indicator goes off).
- The vehicle speed is between approximately 20 mph (30 km/h) and 90 mph (145 km/h).
(3) Control the accelerator pedal to reach the desired speed.
S03397
S03117
Conven-
tional
Cruise
Control
indicator
(white)
S02711
READY
indicator
D
B1432BE-A.book 97 ページ 2020年8月6日 木曜日 午後1時12分
Содержание Crosstrek Hybrid 2021
Страница 2: ...B1432BE A book 2...
Страница 123: ...123 MEMO B1432BE A book 123...
Страница 124: ...124 MEMO B1432BE A book 124...