Subaru Ascent 2020, Быстрое руководство

Страница: 27 / 40

25
ICON MODE
Auto Vehicle Hold
ON
Auto Vehicle Hold
OPERATION
Auto Vehicle Hold (AVH)
This function automatically holds your Subaru in
place when at a complete stop, such as a traffic
signal, even after you release the brake pedal. Press
the Auto Vehicle Hold switch on the center console to
turn on the function. The indicator in the combination
meter will illuminate.
While your Subaru is being held by this function,
the operation indicator in the combination meter
will illuminate. The function is canceled when you
depress the accelerator pedal or the brake pedal.
Press the switch again to turn it off. The function works
with the select lever in either the “D” or “R” position.
TURNING OFF THE VEHICLE
Without Push-button Ignition Switch
To Stop the engine:
1. Stop your Subaru completely.
2. Move the select lever to the “P” position.
3. Turn the ignition switch to “OFF”.
NOTE: The windows will remain active for about 45 seconds and the SUBARU STARLINK ™
Multimedia system will remain on for about three minutes or until a door is opened,
whichever occurs first.
With Push-button Ignition Switch (if equipped)
To Stop the engine:
1. Stop the vehicle completely.
2. Move the select lever to the “P” position.
3. Press the ignition switch.
NOTE: The SUBARU STARLINK
™
Multimedia system will remain on for about three
minutes or until a door is opened, whichever occurs first.