Subaru 697-95-070, Руководство по эксплуатации

Страница: 8 / 12

SET UP
6
HOOK UP
1. FILL/ ADD SMOKE PRODUCING FLUID
Remove Fluid Fill Plug with hex key
Pour Subaru-Approved Smoke Agent into Fluid
Fill Port until fluid level is near top of fill port
Replace Fluid Fill Plug
Do not overfill
Takes up to 2 fluid ounces to refill when empty
Do not use dye or UV dye in any Subaru
Intake, Exhaust, or EVAP system because it
may coat or harm critical sensors
2. INSTALL HANDLE-HOOK
Use a wrench to tighten jam nut
!
3. CONNECT TO POWER
This machine runs on a fully-charged 12-Volt battery
Connect red lead (+) to battery’s positive terminal
Connect black lead (-) to chassis ground
Do not connect to battery charger or jumper box
POWER INDICATOR:
Green Light: Machine has adequate power
Flashing Green Light: Improper Power, Power is too high or too low
No Light: No Power, See Troubleshooting
!
!