Lane Keep Assist
59
Press the
(Lane Keep Assist) switch once again to turn it off, and “
” (Lane Keep
Assist indicator) is turned off on the EyeSight display area.
The Lane Departure Prevention Function goes into the standby status, and the lane indica-
tor illuminates when all of the following conditions are met.
•
The vehicle speed is between approximately 40 MPH (65 km/h) and 90 MPH (145 km/h).
•
The system is detecting the lane markings.
•
The driver is holding the steering wheel.
•
When driving on a road that has a lane width that is between approximately 10 ft (3 m)
and 15 ft (4.5 m).
•
When driving on a straight road or gentle curve.
•
When driving near the center of a lane.
When the vehicle is about to depart from the lane, Lane Departure Prevention Function
starts to operate and “
” (Lane Keep Assist indicator) illuminates in green while it is
operating.
NOTE
•
If you just lightly put your hands on the steering wheel for a certain period
of time or if you do not operate the steering wheel, the function will auto-
matically be canceled. (“
” Lane Keep Assist indicator) illuminates in
white again.)
•
Lane Departure Prevention Function operates when the system deter-
mines that the vehicle will depart from the lane if you continue to drive in
the same manner. Therefore, it operates at an earlier timing than Lane
Departure Warning (
⇒
Refer to page 68.) (it may depend on the surround-
ing environment and road condition).
•
The lane indicator in the standby status and in operation may illuminate
only on the left side or right side.
miles
A
MPG
miles
A
MPG
miles
A
MPG
S02045
Lane Keep
Assist
indicator
(white)
Turned on
Standby status
In operation
(white)
(green)
B2522BE-A.book 59 ページ 2015年5月15日 金曜日 午後12時22分
Содержание 2016 Outback
Страница 99: ...98 MEMO ...