3
Getting
Started
Instrument
Panel
Gauges
Personalize
Contr
ols
While
Operating
Safety/In Case
of Emer
gency
Additional
Information
Seating
Getting
Started
10-Way Power Driver’s Seat
(if equipped)
1. Forward/Backward, Angle and Height
Move the switch toward the front or rear to
move the seat forward or backward. Pull the
switch up or push down on the front of the
switch to adjust the angle of the seat cushion.
Pulling the switch straight up or pushing the
switch straight down will adjust the height of
the entire seat cushion.
2. Seatback
Move the switch in the corresponding
direction to adjust the angle of the seatback.
3. Lumbar Support
Press the front part of the switch to increase
lumbar support; press the rear part of the
switch to decrease lumbar support.
Heated Seats
(if equipped)
Press the front seat heater
switch. Each time you
press the switch, the mode
will change as follows:
High, Mid, Low, Off.
Rear Seat Heater
(if equipped)
Press the rear seat heater switch. Each time you press the switch, the mode will
change as follows: High, Low, Off.
3
2
1
2088522_16b_Subaru_Legacy_QRG_072815.indd 3
7/28/15 1:37 PM
