Subaru 2013 Forester, Руководство пользователя

Страница: 221 / 529

Black plate (223,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
Illumination brightness con-
trol
The illumination brightness of the instru-
ment panel dims under the following
conditions.
.
when the light switch is in the
“ ”
or
“ ”
position (except Australia models)
.
when the light switch is in the
“ ”
or
“ ”
position (Australia models)
.
when the light control switch is in the
“
AUTO
”
position and the headlights turn
on automatically (models with auto on/off
headlights: Refer to
“
Headlights
” F
3-90.)
You can also adjust the illumination bright-
ness for better visibility in the following
ways.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
.
When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the auto-
matic dimming function does not work
at all.
.
The brightness setting is not can-
celed even when the ignition switch is
turned to the
“
LOCK
”
/
“
OFF
”
position.
Headlight beam leveler (if
equipped)
&
Automatic headlight beam
leveler (models with HID
headlights)
The HID headlights generate more light
than conventional halogen headlights.
Therefore a driver of an oncoming vehicle
may experience too much glare when your
headlight beam height adjustment is high
when the vehicle is carrying a heavy load.
The automatic headlight beam leveler
adjusts the headlight beam height auto-
matically and optimally according to the
load being carried by the vehicle.
Instruments and controls/Illumination brightness control
3-93
–
CONTINUED
–
3