2007 New Model Update
(916)
2007 Subaru B9 Tribeca Page 17
* Refer to STIS (Subaru Technical Infromation System)
*** New Feature
June 2006
Driver's Seat Memory Function
(SEE PAGE 80 FOR POWER SEAT MEMORY CALIBRATION PROCEDURE)
Two seat positions can be registered. Register the seat position with button “1” or “2” and retrieve
the seat position by pressing either button.
The following seat positions can be registered:
Forward/backward position of the seat
Angle of seatback
Angle of seat cushion
Height of seat
Registration of seat position:
1. With the transmission selector lever in the “P” position, adjust the seat position.
2. While pressing the “SET” button, press the desired button “1” or “2”.
3. The chime sounds once, and the seat position is registered.
Never retrieve the seat position while driving to avoid the possibility of loss of vehicle control and or
personal injury.
Perform the seat position retrieval before driving. Be sure to confirm that the selector lever position
is in the “P” position. Do not drive until the retrieval of the seat position is complete.
When retrieving a registered seat position, make sure the hands, feet and possessions of rear seat
passengers are clear of the seat adjusting mechanism.
When any trouble or a malfunction occurs during the retrieval of the seat position, stop the retrieval
of the seat position using any of the control switches for manual adjustment, seat memory set
button, seat memory registered button 1 or 2.
1. With the transmission selector lever in the “P” position, press the desired button “1” or
“2”.
2. The chime sounds once and the seat moves to the registered position.
3. When the seat moves to the registered position, the chime sounds twice.
