Subaru 2006 Impreza Скачать руководство пользователя страница 29

Страница: 29 / 365

1-2

Seat, seatbelt and SRS airbags

Front seats

Never adjust the seat while driv-

ing to avoid the possibility of loss

of vehicle control and of personal

injury.
Before adjusting the seat, make

sure the hands and feet of rear

seat passengers are clear of the

adjusting mechanism.
Seatbelts provide maximum re-

straint when the occupant sits

well back and upright in the seat.

To reduce the risk of sliding under

the seatbelt in a collision, the

front seatbacks should be always

used in the upright position while

the vehicle is running. If the front

seatbacks are not used in the up-

right position in a collision, the

risk of sliding under the lap belt

and of the lap belt sliding up over

the abdomen will increase, and

both can result in serious internal

injury or death.

The SRS airbags deploy with con-

siderable speed and force. Occu-

pants who are out of proper posi-

tion when the SRS airbag deploys

could suffer very serious injuries.

Because the SRS airbag needs

enough space for deployment, the

driver should always sit upright

and well back in the seat as far

from the steering wheel as practi-

cal while still maintaining full ve-

hicle control and the front passen-

ger should move the seat as far

back as possible and sit upright

and well back in the seat.

100082

Put children aged 12 and under in

the rear seat properly restrained at

all times. The SRS airbag deploys

with considerable speed and force

and can injure or even kill children,

especially if they are 12 years of age

and under and are not restrained or

improperly restrained. Because chil-

dren are lighter and weaker than

adults, their risk of being injured

from deployment is greater. Conse-

quently, we strongly recommend

that ALL children (including those in

child seats and those that have out-

grown child restraint devices) sit in

the REAR seat properly restrained

at all times in a child restraint device

or in a seatbelt, whichever is appro-

priate for the child

s age, height and

weight. Secure ALL types of child

restraint devices (including forward

facing child seat) in the REAR seats

at all times.
NEVER INSTALL A REARWARD

FACING CHILD SEAT IN THE FRONT

SEAT. DOING SO RISKS SERIOUS

INJURY OR DEATH TO THE CHILD

BY PLACING THE CHILD

S HEAD

TOO CLOSE TO THE SRS AIRBAG.

Содержание 2006 Impreza














































































































































































































































































































































































Результаты поиска

Содержание 2006 Impreza

Отзывы:

Похожие инструкции для 2006 Impreza

Бренды по названию

Популярные бренды

Subaru 2006 Impreza, Руководство пользователя

Результаты поиска

Содержание 2006 Impreza

Отзывы:

Похожие инструкции для 2006 Impreza

Бренды по названию

Популярные бренды