10
|
Sub-Zero Customer Care 800.222.7820
Custom Panels
For integrated models, custom door panels and handle
hardware must be installed. Stainless steel panels are
available through an authorized Sub-Zero dealer. For local
dealer information, visit the find a showroom section of our
website, subzero.com.
The thickness of the custom panel can vary. A minimum
5
/
8
"
(16)
thick panel is required, but the thickness can be
increased provided it does not exceed the maximum panel
weight indicated in the chart below. The depth of each
integrated model is 24"
(610)
. Allow for panel thickness when
planning the finished opening depth.
PANEL REQUIREMENTS
PANEL WEIGHT
MAX
18" Column
45 lb
(20 kg)
24" Column
60 lb
(27 kg)
30" Column
75 lb
(34 kg)
36" Column
75 lb
(34 kg)
PANEL WEIGHT
MAX
30" Tall (door)
50 lb
(22 kg)
36" Tall (door)
60 lb
(27 kg)
Drawer
15 lb
(7 kg)
PANEL THICKNESS
MIN
All Panels
5
/
8
"
(16)
Reveals between panels can vary,
1
/
8
"
(3)
reveals are typical.
CAUTION
When installing a panel thicker than 1"
(25)
, the 90° stop
may be required to prevent damage to the unit and
adjacent cabinetry.
CAUTION
As reveals between cabinetry and the unit decrease,
severe finger pinching can occur while door is closing.
Finish all sides of custom panels. They will be visible when
the door/drawer is open.
D-style handles are recommended. Door handles must be
located near the edge of the panel opposite the hinge and
should be centered top to bottom. Drawer handles must
be located near the top edge of each panel. Stainless steel
tubular and pro handles are avail able through an authorized
Sub-Zero dealer. For local dealer information, visit the find a
showroom section of our website, subzero.com.
PANEL INSTALLATION
