Sub-Zero 3 1 5 I, Руководство по установке и эксплуатации

Страница: 5 / 24

5
Dimensions in parentheses are in
millimeters unless otherwise specified.
S U B - Z E R O M O D E L S 3 1 5 I A N D 3 1 5 I P I N S T A L L A T I O N
IMPORTANT NOTE: The floor under the
ice maker must be at the same level as the
surrounding finished floor.
IMPORTANT NOTE: When you move the unit
using a hand truck or dolly, position the dolly
on the side of the unit and secure the door so
it does not open while transporting the unit.
Any finished flooring should be protected
with appropriate material to avoid any
damage from moving the unit.
M O D E L S 3 1 5 I A N D 3 1 5 I P
Overall Width 15
3
/
16
" (386)
Overall Height 33
5
/
8
" (854)
Overall Depth 24" (610)
Minimum Door Clearance 15
1
/
4
" (387)
Rough Opening Width 15
1
/
4
" (387)
Rough Opening Height 34
1
/
2
" (876)
Minimum Height Required
(levelers in)
33
3
/
4
" (857)
Rough Opening Depth 24" (610)
Dimensions may vary ±
1
/
8
" (3).
O V E R A L L D I M E N S I O N S
Models 315I and 315IP
Dimensions may vary ±
1
/
8
" (3).
33 5 /
8
"
(854)
15
3
/
16
"
(386)
29 3 /
8
"
(746)
4"
(102)
33 5 /
8
"
(854)
19"
(483)
2 1 /
8
"
(54)
SIDE VIEW FRONT VIEW
19"
(483)
TOP VIEW
15 3 /
16
"
(386)
115˚
DOOR SWING
S
I N S TA L L AT I O N S P E C I F I C A T I O N S
A R E A R E Q U I R E M E N T S
Before moving the ice maker in place, be sure
the finished opening dimensions, electrical and
plumbing locations are accurate. Refer to the
Installation Specifications illustrations on
pages 7–8. The illustrations below provide
overall dimensions for Models 315I and 315IP.
Be sure your plumber, electrician and cabinet
installer have this information before finishing
work is completed.
Model 315I is a gravity drain model that
requires a drain tube that is pitched down from
the outlet at the back of the unit to the sanitary
sewer connection. Model 315IP has a built in
drain pump that will pump water up to a drain
point, such as a nearby sink. Refer to specifica-
tions on pages 7–8.
IMPORTANT NOTE: If the ice maker is
installed in a corner, the door swing may be
limited due to handle contact with the wall or
cabinet face.