Suavinex BW060, Инструкция по эксплуатации

Страница: 23 / 51

tap water.
7- Leave to drain and dry all wet parts (inside
and outside) with a soft cloth.
8- If the appliance is not going to be used for a
long period after cleaning, dry all its parts. Then
store it in a dry, well-protected place.
4.2. CLEANiNg THE OuTSiDE OF THE
APPLiANCE:
1- Clean the appliance with a soft, slightly
damp cloth.
2- Do not use abrasive products such as
aggressive detergents, alcohol, solvents
or similar products, as they could cause
permanent damage to the surfaces of the
appliance.
EN - 43
5. TROuBLESHOOTiNg
For any further questions you might have, please contact Suavinex’s official distributor in your country.
We will be happy to help.
PROBLEm SOLuTiON
- Check that there is enough water in the tank (A).
- Check that the power cable (F) is plugged into the mains.
- Check that the button (C) is in the ON position.
- Check that the LED light switches on properly.
- To reactivate another cycle after a cycle of use, switch
the appliance off and wait for the heating element to cool
down enough. Then you can start another cycle.
- Check that the heating element is cold.
- Check that the appliance is plugged into the mains.
- Check that you have followed all the steps in the
aforementioned “instructions for use”.
- Check that it is plugged into the mains.
- Wait for a few minutes after a cycle has ended.
THE HEATINg oPTIoN doEs
NoT Work.
THE lEd lIgHT doEs NoT
sWITCH oN.
THE APPlIANCE doEs NoT
sWITCH oN.