Stylus 450, Руководство пользователя

Страница: 15 / 24

Pride Stylus 450 www.pridemobility.com 15
SWING-AWAY FOOTREST (SFR)
FOOT PLATE LENGTH
You can change the SFR foot plate
length between 30 – 43 cm (12 – 17 in.) in
2.5 cm (1 in.) increments. This length is
measured from the SFR foot plate to the
top of the SFR. See figure 15.
Figure 14. Drive Wheel Quick Release
QUICK-RELEASE
BUTTON
NOTE: If you change the drive wheel
position, you may have to shorten the
foot plate length, change the caster
height, and adjust the park brake.
Consult your authorised Pride Dealer.
Also refer to the Seat-to-Floor Height
Matrix.
To change the drive wheel position:
1.
Press the quick-release button and pull
the drive wheel off. See figure 14.
2. Remove the hardware that fastens the
drive wheel bracket to the frame.
3. Reposition the drive wheel bracket (ei-
ther position A, B, C, or D).
4. Reinstall the hardware that fastens the drive wheel bracket to the frame.
5. Reinstall the drive wheel. Make sure that the wheel axle is snapped securely
into the drive wheelbracket.
6. Repeat for the other drive wheel.
NOTE: When using an oxygen tank holder, the drive wheel bracket must be
in either position A or B.
Seat-to-Floor Height Matrix
S-T-F Height Caster Position Drive Wheel Position
49.5 cm (19.5 in.) 20 cm (8 in.) (second hole 61 cm (24 in.)(position A or C)
from bottom)
47 cm (18.5 in.) 15 cm (6 in.) (second hole 56 cm (22 in.)(position A or C)
from bottom)
47 cm (18.5 in.) 20 cm (8 in.) (top hole) 61 cm (24 in.)(position B or D)
44.5 cm (17.5 in.) 20 cm (8 in.) (top hole) 56 cm (22 in.)(position A or C)
47 cm (18.5 in.) 15 cm (6 in.) (second hole 61 cm (24 in.)(position B or D)
from bottom)
44.5 cm (17.5 in.) 15 cm (6 in.) (top hole) 56 cm (22 in.)(position B or D)
39 cm (15.5 in.) (SH)*13 cm (5 in.) (top hole) 51 cm (20 in.)(position A or C)
Figure 15. SFR Foot Plate Adjustment
SCREW
* Super Hemi