Part Number# 971830
Rev B (05/16)
Stylmark, Incorporated
♦
6536 Main Street NE, PO Box 32008
♦
Minneapolis, MN 55432
1-800-328-2495
♦
www.stylmark.com
Step-by-Step Instructions – Frame Assembly –
Intermediate Segments (Cont.):
6.
Align the hole in the Y bracket with the screw hole in the
Splice Bracket. Insert the socket head cap screw and
tighten with a 3/16” hex key wrench until the two
intermediate segments are firmly secured together. See
Figure 11.
7.
If there are wire connectors present, connect them now.
For example, insert a male line voltage connector into a
female line voltage connector. See Figure 12.
8.
Tuck all wires and connectors under the covers and re-
secure the cover section to the frame segment with the
retained screws using a Philips head screwdriver. Make
sure not to crimp any wires under the edge of the cover.
9.
Repeat these steps for all other intermediate segments of
the frame.
Stylmark Installation Instructions: Optima LED® DS5 Perimeter Lit
Figure 11
Figure 12
Low Voltage Connector
Line Voltage Connector
