5
Drill holes on the underside of the countertop,
approximately 1/2" from edge of the sink to be installed.
Holes should be evenly spaced approximately 6" to 8"
apart starting from every corner as shown below.
Insert anchors under the countertop on the
drilled holes, so they are ready to fasten the sink flange.
Anchors should be inserted with a hammer until flush.
Clamp the sink and hold in place while adhesive cures.
There are different methods, we suggest using a couple
of pieces of wood with a threaded rod. Set one piece of
wood under the sink and another over the countertop.
Clamp the boards so the sink stays suspended about 1 in
below the countertop. Clean sink flange and
underside of cut-out area of countertop, making sure
that the area is smooth and free of debris. Apply
continuous bead of silicone caulk evenly on top of sink
flange.
Page 3
ENGLISH
Stylish International Inc.
www.stylishkb.com
stylish.international.inc
+1-855-789-5352
TOLL
FREE
Products and specifications shown are subject to change without notice. Please contact our technical support at [email protected] for any further queries, replacement parts requests, etc.
©2021 Stylish® all right reserved.
INSTALLATION GUIDE
UNDERMOUNT
COMPOSITE GRANITE SINK
3/8" diameter
by 1/2" deep hole
1/2"
3/8"
Granite Sink
Bracket
Fastener
Anchor
Countertop
Countertop
Wood Studs
Silicone
Silicone
Option 1
Option 2