ARM-GZB208-E1-1
12
Skin rejuvenation
：
5-7 days each time
，
can use this device for a long
period;
8.2 About Operation
1) Adjust energy level
a) Adjust energy level from low to high
：
Don’t adjust much for one time
；
b)Test before operation
：
watch whether the shot is normal before treatment
；
c) Deep color skin shall use low energy level
；
2) Note during operation
1
）
Long hair can absorbs more light energy and this may hurt skin. So
before hair removal, cut off the longer hair
（
leave hair 2~3mm long
）
;
2
）
Forehead, upper lip, chin —Skin is very thin, so use low energy level;
Customer may feel a little pain during hair removal
；
3
）
Make the tip fully touch skin to ensure skin absorb enough light hand heat
；
4
）
During HR operation mode, delay between two treatments shall be 30s
8.3 Operation Procedure
1
）
Clean skin
；
2
）
Start equipment and adjust relative energy level
；
3
）
We advise users to wear goggles
；
4
）
HR mode
：
first make test on skin with no hair: if skin turns a little red and
a little heat, it means the energy level you set is available, then you can
remove hair
；
5
）
SR mode
：
first make test on skin under jawbone: if kin turns a little red
and a little heat, it means the energy level you set is available, then you
can treat with face from the bottom up
；
6
）
Make treatment on entire parts; During treatment watch skin’s reflection
for adjusting in time;
7
）
Clean treated parts after treatment
；
8
）
Treated skin needs moisturizing and avoid sunshine
Suggestion
：
A) Before treatment, smear some beauty products on skin with
moisturizing, whitening or renovating functions according to skin’s
situation;
B) After treatment, use home beauty products on skin with moisturizing,
whitening or renovating functions to make skin smooth and shiny
