StyleWell WHEATON 1007519970/320010627/611768149018/23WM90536-PC78, Инструкция по использованию и уходу

Страница: 17 / 25

17
HomeDepot.com
Please contact 1-877-527-0313 for further assistance.
Operation
Operation
3 4
Adjusting the heater
Press the heater button on the control panel to turn on/off
(00) and adjust the heater setting.
The “+ / - ” buttons on the remote will increase / decrease
temperature setting.
The thermostat setting range is 82°F - 62°F ( 27°C - 17°C)
or continuously ON.
The thermostat is adjustable by 2°F or 1°C increments.
To change between °F and °C, press and hold the heater
button on the control panel for 3 seconds.
NOTE:
To change between °F and °C press and hold the
Heater button on the control panel for 3 seconds.
Push the Power button to supply power to all
functions of the fireplace and put the insert in a
standby mode.
Push the Power button again to turn off all functions.
1 2
Powering the fireplace
NOTE:
Holding the Power button on the control panel for
10 seconds will disable the heater function.
NOTE:
All previous settings are held in memory, so the
next time you power up the fireplace, the unit will turn on
with the same settings.
Adjusting the flame
There are 5 brightness levels that can be selected and OFF
(00) setting. Settings F5 - F1 decrease in brightness.
Pressing the Timer button will cycle through the timer
settings; 30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H, 7H,
8H, 9H,and off (00).
Setting the timer
NOTE:
The control panel can be accessed at the upper-right corner of the insert.
/
The flame speed is only adjustable from the remote
control. Each flame setting has 5 speed options available.
Setting 1 is slowest ranging up to setting 5 which is the
fastest.
5
Adjusting the flame speed