Ee (1)
Assembly
Instructions Sheet
4
Care and Maintenance
Pre-Assembly
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Chair: 225 lbs
HARDWARE INCLUDED
NOTED:
Hardware not shown
to actual size.
Safety Information
Do not completely tighten bolts and nuts until indicated in assembly step.
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
CAUTION:
If you overload your
furniture, injuries can occur.
Wash frames and cushions with a mild solution of soap and water; rinse thoroughly.
Dry completely and drip-dry cushions. Do not use bleach or solvents.
Ea (6 + 1 spare)
Short Bolt
Eb (4)
Long Bolt
Ec (10)
Metal Washer
Ed (1)
Allen Wrench
